Product Description
Best Price Flange Mounted Geared Motor Planetary Reduction Gear Box
The high-precision planetary gearbox adopts spur gear design, and is used in various control transmission fields with servo motors, such as precision machine tools, laser cutting equipment, battery processing equipment, etc. It has the advantages of large torsional rigidity and large output torque.
Product Description
1.Hole output structure,easy installation ;
2.Square output,standard size;
3.The input specifications are complete and there are many choices;
4.Straight transmission ,single cantilever structurer,design simple,high cost performance;
5.Keyway can be opened in the force shaft;
6.stable operation,low noise;
7.Size range:60-160mm;
8.Ratio range:3-100;
9.Precision backlash:8-16arcmin;
10.Support custom according to drawings or samples
Product Parameters
| Specifications | PFN60 | PFN80 | PFN90 | PFN120 | PFN160 | |||
| Technal Parameters | ||||||||
| Max. Torque | Nm | 1.5times rated torque | ||||||
| Emergency Stop Torque | Nm | 2.5times rated torque | ||||||
| Max. Radial Load | N | 240 | 400 | 450 | 1240 | 2250 | ||
| Max. Axial Load | N | 220 | 420 | 430 | 1000 | 1500 | ||
| Torsional Rigidity | Nm/arcmin | 1.8 | 4.7 | 4.85 | 11 | 35 | ||
| Max.Input Speed | rpm | 8000 | 6000 | 6000 | 6000 | 4000 | ||
| Rated Input Speed | rpm | 4000 | 3500 | 3500 | 3500 | 3000 | ||
| Noise | dB | ≤58 | ≤60 | ≤60 | ≤65 | ≤70 | ||
| Average Life Time | h | 20000 | ||||||
| Efficiency Of Full Load | % | L1≥96% L2≥94% | ||||||
| Return Backlash | P1 | L1 | arcmin | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 |
| L2 | arcmin | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ||
| P2 | L1 | arcmin | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | |
| L2 | arcmin | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 |
| 4 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 5 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 7 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| 10 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| L2 | 12 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | |
| 15 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 16 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 20 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 25 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 28 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 30 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 35 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 40 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 50 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 70 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 100 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| Technical Parameter | Level | Ratio | PFN60 | PFN80 | PFN90 | PFN120 | PFN160 | |
| Rated Torque | L1 | 3 | Nm | 27 | 50 | 96 | 161 | 364 |
| 4 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 5 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 7 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 10 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| L2 | 12 | Nm | 27 | 50 | 96 | 161 | 364 | |
| 15 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 16 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 20 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 25 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 28 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 30 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 35 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 40 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 50 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 70 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 100 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| Degree Of Protection | IP65 | |||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | ||||||
| Weight | L1 | kg | 0.95 | 2.27 | 3.06 | 6.93 | 15.5 | |
| L2 | kg | 1.2 | 2.8 | 3.86 | 8.98 | 17 | ||
Company Profile
Packaging & Shipping
1. Lead time: 10-15 days as usual,30 days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ TNT/ UPS/ EMS/ FEDEX
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Double-Step |
| Samples: |
US$ 292/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a Planetary Gearbox?
A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:
planetary gearboxes
If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use three different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the two gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are three main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than one output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional one is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install one with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
planetary gearboxes with output shaft
The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are two or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have three components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These three components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetary gearboxes with integer number of teeth
When designing a planetary gearbox, one must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.
editor by Dream 2024-05-15
China Custom Powder Metallurgy Sintered Gears Tubule Flange Output Shaft Planetary Gearbox Speed Reduction Gear Box for DC Motor Gear Parts planetary gearbox efficiency
Solution Description
Our principal products, metal gearboxes ,equipment parts for motors by way of powder metallurgy processing.
We focus in designing and production highly engineered, custom made elements and assemblies. Our specialist workers are geared toward offering customers with substantial good quality products and excellent service .
A gearbox is a electrical power transmission unit to produce high torque by decreasing the push speed or boost the generate speed the other way. Planetary gearbox consisting 3 parts: sunlight gear, world equipment and ring equipment . A Sunlight gear is a gearwheel in a planetary equipment program, that rotates close to its personal axis and has other gears (world gears) that rotate about it. Considerably like the Sunshine and planets in our solar technique. The amount of planetary gears in a gearbox may differ based mostly on the gear ratio. Most planetary gearboxes have from 2 to 5 earth gears. When hunting at planetary gears, the energy of the gearbox is typically determined by the size of the sunlight equipment. More substantial sunlight gears will let for greater torque values. The world carrier,Its goal is to maintain up to gears of the identical measurement, which mesh with the sunlight gear.
Our gearbox,Light-weight bodyweight,small dimension, higher carrying ability, extended services life .Easy operation, minimal noise, large output torque, massive velocity ratio, high effectiveness, power diversion, and multi-tooth meshing by powder metallurgy process .
Gearbox ratio 3 to 1000 .
Custom-made steel components specification
| Solution type | Planetary gearbox , equipment elements , speed reducer , motor gears , customized gearbox |
| Materials | Metal |
| Approach | Powder metallurgy , metal injection molding , cnc machining |
| Remedy | plating ,sand blasting , PVD , coating |
| Tolerance | ±0.3% |
| Drawing format | DWG ,IGS , STP |
| Shipping and delivery time | ten times for mass production |
Powder metallurgy (PM) is a metal elements / elements fabrication way and manufactured from metallic powders content . The approach of powder metallurgy (PM) is mixing fantastic powder materials , press them into a sought after shape or sort compacting , and heating the compressed substance in a controlled atmosphere to CZPT the substance sintering .PM approach can keep away from , or drastically minimize the need to have to use steel removing processes,thereby significantly lowering generate losses in manufacture and oftern resulting in decrease costs .
The powder metallurgy (PM) consist 3 methods : powder mixing,compaction and sintering .Frequent merchandise contain gears , structural steel parts , bushings utilized for vehicles , appliances and powder equipments .
Benefits of powder metallurgy
Products manufactured by powder metallurgy (PM) generally do not need even more ending , because generates excellent surface area end.
Maintains close dimensional tolerances
Provides components which may be heat treated for enhanced energy or improved put on resistance .
There is considerably less wastage of raw material , can be extremely affordable for mass manufacturing .
Intricate designs areas can be manufactured . Gives controlled porosity for self-lubrication or filtration.
Fits to large volume elements productions needs .
Customized steel areas
Workshop
|
US $3 / Piece | |
2,000 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Three-Step |
###
| Samples: |
US$ 6/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product type | Planetary gearbox , gear parts , speed reducer , motor gears , custom gearbox |
| Material | Metal |
| Process | Powder metallurgy , metal injection molding , cnc machining |
| Treatment | plating ,sand blasting , PVD , coating |
| Tolerance | ±0.3% |
| Drawing format | DWG ,IGS , STP |
| Delivery time | 10 days for mass production |
|
US $3 / Piece | |
2,000 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Three-Step |
###
| Samples: |
US$ 6/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product type | Planetary gearbox , gear parts , speed reducer , motor gears , custom gearbox |
| Material | Metal |
| Process | Powder metallurgy , metal injection molding , cnc machining |
| Treatment | plating ,sand blasting , PVD , coating |
| Tolerance | ±0.3% |
| Drawing format | DWG ,IGS , STP |
| Delivery time | 10 days for mass production |
Planetary Gearbox Basics
If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
Wheel drive planetary gearboxes
Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.
Spur gears
There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
Helical gears
A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.
Various sizes
There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
Applications
This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.
editor by czh 2023-01-02
China Custom ZPLF ZPLE060 Gearbox Nema23 24 High Torque Speed Straight Spur Sun Gear Box Planetary Reducer for Servo Stepper Motor CNC Router planetary gearbox advantages
Warranty: 18months
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, CNC center, CNC Routers, Electronics, Packaging, Medical
Customized support: OEM, ODM
Gearing Arrangement: Planetary
Output Torque: Rated 8.5 to 41 N.m
Input Speed: Rated 3000RPM, Max.6000RPM
Output Speed: ≤ 2000RPM
Advantages: High Torque Precision,Low Nose, Extra Long Lifetime,Cost Effectiveness
Matching Motors: All Brands of Target Servo &Stepper Motors
Efficiency: 1-stage 97%, 2-stage 95%
Max. Torque: 2 Times of the Rated
Noise Level: <60dB
Average Lifetime: 20000 hours
IP Grade: IP65
Backlash: 1-stage <8 arcmin, 2-stage <10 arcmin
Contact Us for: Reduction ratios, shaft adapter details, customizations etc.
Applications: CNC Center& Router,Electronics,New Energy,Textile,Packaging,Medical
Certification: Reach, ROHS
Packaging Details: Well packed in strong carton boxes or pallets, which support all shipments, such as express delivery, airway, train, ship etc.
Port: Chinese Mainland Ports
Store Promotion Contact Us for,1. Detailed customizationrequirements.2. Better prices for orders with volume.3. Special leadtime and delivery requirments. Target Applications Widely Used in Automation IndustryA. CNC Centre and CNC Routers, including CUTTING, ENGRAVING, MILLING, MARKING, WELDING, SOLDERING etc processing methods andcutting tool like Laser, Plasma, Machine Tool etc.B. Medical and healthcare equipment, such as CT Scanner, X-ray Scanner, Operation Robotics, Diagnose and Analysis, etc.C. Equipment, such as Electronics manufacturing, Aerospace, Military Industry, Automotive Manufacturing, Logistics System, Textile, Printing, Food Industry, Packaging, etc. Product Highlights Match with All MotorsCustomization of installation flange.Input shaft adapter available.Matching all brands of Servo motors (Panasonic,Mitsubishi, Sanyodenki, Delta, etc. ) and stepper motors.High PerformanceHigh Reliability,High Efficiency,Long Lifetime (average 20000 hours), High Torque,Low Noise,High Speed Range,High Precision.100% Replacement Replace other brands of planetary reducers easily and sold hundreds of thousands in high-end automation market. Customer Values Low Total Cost of OwnershipHigh performance, extra long lifetime and free of maintenance helps to save TCO.Shorter Time to MarketMature products & techniques,easy to use, quick customization helps to reduce machine development time.Enhanced Machine Specialties and Customer LoyaltyFlexible customization provides the most proper products for your application.Contact us for your requirement. Series Overview Product Specifications Key Performance ParametersPlease contact us if u want to know more or need the complete catalog. Mechanical Dimensions for 1 stage(L1), 2 stage(L2), 3 stage(L3). Please refer to the figure above for reductions ratios of each stage.Motor Integration side can be customized if needed. Product Packaging Single Piece5-layers smaller Carton Box, which is strong enough for all types of shipment. Carton More than 1 and less than 20 pieces will be packed in 1 carton, which is also 5 layers export level and strong enough for all shipments methods. PalletMore than 8 cartons can be packed in Eco-friendly pallets, which is especially suitable for train and sea shipments. Company Profile Your Reliable Motion Control PartnerCompany:Future Oriented Development Strategy,Focused on middle & High-end Industrial Automation Segments,Rich Industrial Automation Experiences,Cutting-edge & Customer Oriented Products High Performance & Reliability.R&D:More than 15 Years Experiences,Wide International R&D Cooperation,Flexible & Fast Customization,Continuous Technology EvolutionQuality Control:Strict Quality Control System, 100% Functional Test, 100% 48 Hours Aging Tests, Rich Certificates, ISO9001, CE, ROHS, REACH etc. FAQ 1. How can it be compatible with all brands of servo and stepper Motors?We can do motor mounting side customization and shaft adapter customization, which enables our planetary reducer compatible with allbrands of servo and stepper motors.2. Are your reducers real planetary?Yes. Also we have patents of the reducers, special design and metal processing methods, which enable them working with less noise and longer lifetime.3. If we need higher volume, is better prices available?Yes. Please contact our customer service any time and we are ready to help! 4. How about warranty?We have 12 months warranty for most products and for special region such as EU we have 18 months warranty.For large volume order, we offer free back up reducers.5. What shipment methods supported?All methods are supported, such as express delivery, air shipment, china-Europe train shipment, sea shipment, etc.6. What if the shipping cost higher than expected?Please contact us for freight fee optimization, and we will offer reliable and reasonable shipment. 7. Is your company and trader or producer?We are producer and our HQ is in HangZhou and have 5 affiliated companies for different products production. Welcome to visit our company!8. What certificate does your company and Products have?We have ISO9001, CE, ROHS, REACH etc.We also can do certificates as per customer requirement.9. OthersContact us anytime and we are ready help!
Planetary Gearbox
This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetary gearboxes
Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
Their design
The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.
Applications
In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
Maintenance
The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.
editor by czh
China Custom Mini Drive Reduction Motor Reducer Case Hydraulic Parts Gear Gearbox gear box
Applicable Industries: Construction works
Customized support: OEM
Gearing Arrangement: Planetary
Output Torque: /
Input Speed: /
Output Speed: /
Type: hydrostatic drive
Application: Hydraulic Pump
MOQ: 1
Name: Hydrostatic Winch Drive
Use: tractor
Color: Customer requested
brake: automatic safe fail brake
Certificate: ISO9001
Material: Steel
OEM: Accept OEM
Packaging Details: standard seaworthy packing suitable for long-distance transportation.
Port: HangZhou, ZheJiang
| Product Name | Travel Motor | Material | Metal Steel |
| Color | OEM or Customer’s Request | Application | Heavy Machinery |
| Applicable Vehicle | 14~16Ton | Mass | 180KG |
| Certificate | ISO9001:2008 | OEM | Yes |
1. Consist of built-in variable displacement piston motor, multi-disc brake, planetary gearbox, and functional valve block. 2. The drives feature high working efficiency, long life, great reliability, compact design, high working pressure and Hi-low speed switch control. 3. The case-rotation type travel drives not only can be directly4. installed inside the crawler or wheel, but also can be used in road header or milling machine for power turning drives.5. The drives adopt our patented technology and design experience. The Dimensions and technical performance of the drives conform to Nebtesco, KYB, Nachi, and TONGMYUNG. So our drives can also be used for replacement.
| Click here for More Information>> Low Noise Power Transmission High Efficiency RV Series NMRV Worm Gear Box for Transmission Part Speed Reducers > |
1. The drives described are of the standard type. Other design variants with different ratio, dimensions, and power characteristics are available if so requested for specific applications. 2. The drives have been widely applied in crawler excavator, crawler cranes, road milling machine, road header, road roller, track vehicles, aerial platform, and self-propel drill rigs. 3. The drives not only have been used by domestic customer such as SANY, XCMG, ZOOMLION, but also have been exported to Southeast Asia, Middle East, K series 90 degree Bevel Helical Gearbox with Motor Shaft Mounted Gearbox geared motor India, South Korea, Netherlands, Germany and Russia and so on. Customizations are Welcome ? to get the latest quotation>>>>> Main product Recommend Products Our Services & Strength We’re among the first and best hydraulic products manufactuers in China. We specialize in designing and manufacturing hydraulic winches, hydraulic motors,hydraulic slewing drives, wheel and track drives, planetary gearboxes, High Precision Geared Speed Reducer Planetary Gearbox 90 degree low noise right angle gearbox precision Planetary gearbox travel motors and wheel motors, hydraulic capstans,hydraulic power units, and hydraulic pumps. We have broad product range, and we can provide one-stop and tailored solutions for driving, controlling and moving to our customers. FAQ Q: We Can Not Find The Goods Which We Need From Your Website, What Should We Do?A: We Manufacture And Design Wide Variety Of Hydraulic Products, Some Of Them Have Not Been Uploaded On Website, You Can Send UsDescriptions And Pictures Of The Goods Which You Need, We Will Check Whether We Can Supply. If Not, You Can Send Us Sample ByExpress, We Will Develop This Item For Bulk Orders. Q: Can We Buy 1 Piece Of Each Item For Quality Testing?A: Yes, It’s No Problem.Q: We Want To Buy Your Products, How Can I Pay?A: You Can Pay Via T/T And Western Union. Q: How Can You Guarantee The Quality?A: If You Meet With Quality Problem Within 1 Year, low noise 4071+32 coreless gearreductiondeceleration dc motor with brushed for medical equipment, automatic wheelchair We Will Replace Goods Or Return Your Funds.
| If you have any interest ,please contact us freely |
How to Compare Different Types of Spur Gears
When comparing different types of spur gears, there are several important considerations to take into account. The main considerations include the following: Common applications, Pitch diameter, and Addendum circle. Here we will look at each of these factors in more detail. This article will help you understand what each type of spur gear can do for you. Whether you’re looking to power an electric motor or a construction machine, the right gear for the job will make the job easier and save you money in the long run.
Common applications
Among its many applications, a spur gear is widely used in airplanes, trains, and bicycles. It is also used in ball mills and crushers. Its high speed-low torque capabilities make it ideal for a variety of applications, including industrial machines. The following are some of the common uses for spur gears. Listed below are some of the most common types. While spur gears are generally quiet, they do have their limitations.
A spur gear transmission can be external or auxiliary. These units are supported by front and rear casings. They transmit drive to the accessory units, which in turn move the machine. The drive speed is typically between 5000 and 6000 rpm or 20,000 rpm for centrifugal breathers. For this reason, spur gears are typically used in large machinery. To learn more about spur gears, watch the following video.
The pitch diameter and diametral pitch of spur gears are important parameters. A diametral pitch, or ratio of teeth to pitch diameter, is important in determining the center distance between two spur gears. The center distance between two spur gears is calculated by adding the radius of each pitch circle. The addendum, or tooth profile, is the height by which a tooth projects above the pitch circle. Besides pitch, the center distance between two spur gears is measured in terms of the distance between their centers.
Another important feature of a spur gear is its low speed capability. It can produce great power even at low speeds. However, if noise control is not a priority, a helical gear is preferable. Helical gears, on the other hand, have teeth arranged in the opposite direction of the axis, making them quieter. However, when considering the noise level, a helical gear will work better in low-speed situations.
Construction
The construction of spur gear begins with the cutting of the gear blank. The gear blank is made of a pie-shaped billet and can vary in size, shape, and weight. The cutting process requires the use of dies to create the correct gear geometry. The gear blank is then fed slowly into the screw machine until it has the desired shape and size. A steel gear blank, called a spur gear billet, is used in the manufacturing process.
A spur gear consists of two parts: a centre bore and a pilot hole. The addendum is the circle that runs along the outermost points of a spur gear’s teeth. The root diameter is the diameter at the base of the tooth space. The plane tangent to the pitch surface is called the pressure angle. The total diameter of a spur gear is equal to the addendum plus the dedendum.
The pitch circle is a circle formed by a series of teeth and a diametrical division of each tooth. The pitch circle defines the distance between two meshed gears. The center distance is the distance between the gears. The pitch circle diameter is a crucial factor in determining center distances between two mating spur gears. The center distance is calculated by adding the radius of each gear’s pitch circle. The dedendum is the height of a tooth above the pitch circle.
Other considerations in the design process include the material used for construction, surface treatments, and number of teeth. In some cases, a standard off-the-shelf gear is the most appropriate choice. It will meet your application needs and be a cheaper alternative. The gear will not last for long if it is not lubricated properly. There are a number of different ways to lubricate a spur gear, including hydrodynamic journal bearings and self-contained gears.
Addendum circle
The pitch diameter and addendum circle are two important dimensions of a spur gear. These diameters are the overall diameter of the gear and the pitch circle is the circle centered around the root of the gear’s tooth spaces. The addendum factor is a function of the pitch circle and the addendum value, which is the radial distance between the top of the gear tooth and the pitch circle of the mating gear.
The pitch surface is the right-hand side of the pitch circle, while the root circle defines the space between the two gear tooth sides. The dedendum is the distance between the top of the gear tooth and the pitch circle, and the pitch diameter and addendum circle are the two radial distances between these two circles. The difference between the pitch surface and the addendum circle is known as the clearance.
The number of teeth in the spur gear must not be less than 16 when the pressure angle is twenty degrees. However, a gear with 16 teeth can still be used if its strength and contact ratio are within design limits. In addition, undercutting can be prevented by profile shifting and addendum modification. However, it is also possible to reduce the addendum length through the use of a positive correction. However, it is important to note that undercutting can happen in spur gears with a negative addendum circle.
Another important aspect of a spur gear is its meshing. Because of this, a standard spur gear will have a meshing reference circle called a Pitch Circle. The center distance, on the other hand, is the distance between the center shafts of the two gears. It is important to understand the basic terminology involved with the gear system before beginning a calculation. Despite this, it is essential to remember that it is possible to make a spur gear mesh using the same reference circle.
Pitch diameter
To determine the pitch diameter of a spur gear, the type of drive, the type of driver, and the type of driven machine should be specified. The proposed diametral pitch value is also defined. The smaller the pitch diameter, the less contact stress on the pinion and the longer the service life. Spur gears are made using simpler processes than other types of gears. The pitch diameter of a spur gear is important because it determines its pressure angle, the working depth, and the whole depth.
The ratio of the pitch diameter and the number of teeth is called the DIAMETRAL PITCH. The teeth are measured in the axial plane. The FILLET RADIUS is the curve that forms at the base of the gear tooth. The FULL DEPTH TEETH are the ones with the working depth equal to 2.000 divided by the normal diametral pitch. The hub diameter is the outside diameter of the hub. The hub projection is the distance the hub extends beyond the gear face.
A metric spur gear is typically specified with a Diametral Pitch. This is the number of teeth per inch of the pitch circle diameter. It is generally measured in inverse inches. The normal plane intersects the tooth surface at the point where the pitch is specified. In a helical gear, this line is perpendicular to the pitch cylinder. In addition, the pitch cylinder is normally normal to the helix on the outside.
The pitch diameter of a spur gear is typically specified in millimeters or inches. A keyway is a machined groove on the shaft that fits the key into the shaft’s keyway. In the normal plane, the pitch is specified in inches. Involute pitch, or diametral pitch, is the ratio of teeth per inch of diameter. While this may seem complicated, it’s an important measurement to understand the pitch of a spur gear.
Material
The main advantage of a spur gear is its ability to reduce the bending stress at the tooth no matter the load. A typical spur gear has a face width of 20 mm and will fail when subjected to 3000 N. This is far more than the yield strength of the material. Here is a look at the material properties of a spur gear. Its strength depends on its material properties. To find out what spur gear material best suits your machine, follow the following steps.
The most common material used for spur gears is steel. There are different kinds of steel, including ductile iron and stainless steel. S45C steel is the most common steel and has a 0.45% carbon content. This type of steel is easily obtainable and is used for the production of helical, spur, and worm gears. Its corrosion resistance makes it a popular material for spur gears. Here are some advantages and disadvantages of steel.
A spur gear is made of metal, plastic, or a combination of these materials. The main advantage of metal spur gears is their strength to weight ratio. It is about one third lighter than steel and resists corrosion. While aluminum is more expensive than steel and stainless steel, it is also easier to machine. Its design makes it easy to customize for the application. Its versatility allows it to be used in virtually every application. So, if you have a specific need, you can easily find a spur gear that fits your needs.
The design of a spur gear greatly influences its performance. Therefore, it is vital to choose the right material and measure the exact dimensions. Apart from being important for performance, dimensional measurements are also important for quality and reliability. Hence, it is essential for professionals in the industry to be familiar with the terms used to describe the materials and parts of a gear. In addition to these, it is essential to have a good understanding of the material and the dimensional measurements of a gear to ensure that production and purchase orders are accurate.
in Porto Portugal sales price shop near me near me shop factory supplier Custom Service Mechanical Parts Gear Box Die Cast Aluminum Housing manufacturer best Cost Custom Cheap wholesaler
The group is targeted on generating all range of standard roller chains and sprockets, gears & gearboxes, this sort of as conveyor chain & sprockets , stainless metal chain, agricultural chain and has not just sold its items all over china, but also offered more than 65% merchandise to oversees, including Europe, The us, South-east Asia, and it also has established up storage logistics in locations like Europe. Our item selection involves all kinds of helical equipment, spur gear, bevel gear, equipment rack, worm gear, sprockets,chains, bearings. Our AdvantagesProducts Big volume in Stock, No MOQ necessary We comply with all the international requirements, such as ISO9001 and TS16949 specifications. Custom made Support EPT Areas EPT Box Die Forged EPTT EPT
|
Merchandise Name |
Custom made Services EPT Components EPT Box Die Forged EPTT EPT |
|
EPTT EPT Application/Service Region |
EPT Areas Solution for EPT, EPTT EPTT, EPTT EPTT, transportation products, EPT and EPT method, EPTT EPTT steel Elements, engine bracket, EPT chassis bracket, EPT box , EPT housing , EPT cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, EPT valve, valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, EPTT shaft , EPTT EPT, sprocket, EPTs and many others. |
|
Primary blank Approach for EPTT EPTT |
Die EPTT, Permanent Molding /Gravity EPTT, Reduced Stress EPTT, EPT Pressure EPTT/Sand EPTT, Extrusion EPTT and so forth. |
|
Blanks Tolerance -EPTT Tolerance |
CT4-6 for Long lasting Molding, Die EPTT, CT 9-11 for Sand EPTT |
|
Applicable EPT for casting |
A356./ZL101,GAlSi7Mg (three.2371.sixty one)/AlSi7Mg/, A-S7G, Al Si Alloy, Al Cu Alloy ZL201 Al Mg Alloy ZL301,ZL302, Al Zn Alloy ZL401Zn Alloy Zamak 3, Zamak 5, Zamak seven, Zamak 2 Or in accordance to customer needs |
|
EPTT Blank Size /Proportions |
two mm-1500mm / .08inch-60inch , or in accordance to client specifications |
|
EPTT Blank Bodyweight |
Variety from .01kg-50kg |
|
Relevant Machining Process |
CNC Machining/ Lathing/ Milling/ Turning/ Dull/ Drilling/ EPTTpping/ Broaching/Reaming /EPT/EPT and and so on. |
|
Machining Tolerance |
From .005mm-.01mm-.1mm |
|
EPTTd Area EPTT |
Ra .8-Ra3.two according to customer prerequisite |
|
Relevant Heat Treatment method |
T5~T6 |
|
Applicable Complete Area Treatment |
Shot/sand blast, poEPTTng, EPTr Painting , Powder coating, ED- Coating, End Portray, Anodize (White or Black EPTT) |
|
MOQ |
For EPT casting : 200pcs For Machining: 50pcs |
|
EPT Time |
45days from the receipt day of deposit for Custom Support EPT Parts EPT Box Die Solid EPTT EPT |
contact us
FAQ:
1. Are you a maker or a trading firm?
We are a expert company with over fifteen years’ export expertise for creating and producing automobile EPTTry components.
2. How can I get some samples?
If you require, we are glad to supply you samples for totally free, but the new consumers are anticipated to pay the courier EPT, and the demand will be deducted from the payment for official order.
3. Can you make casting in accordance to our drawing?
Sure, we can make casting according to your drawing, 2d drawing, or 3D cad product. If the 3D cad model can be supplied, the deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment of the tooling can be more effective. But without 3D, dependent on 2d drawing we can even now make the samples properly accepted.
four. Can you make casting dependent on our samples?
Of course, we can make measurement based mostly on your samples to make drawings for tooling generating.
5. What is your quality manage unit in property?
We have spectrometer in residence to check the chemical property, tensile examination EPTT to control the mechanical property and UT Sonic as NDT examining strategy to control the casting detect unEPTTthe floor of casting.
in Chiang Mai Thailand sales price shop near me near me shop factory supplier Carbonize&Quencher Heat Treatment Nmrv Series Worm Gear Box manufacturer best Cost Custom Cheap wholesaler
Our item variety involves all types of helical equipment, spur equipment, bevel equipment, gear rack, worm gear, sprockets,chains, bearings. With thorough requirments, we can also build your special developed solution. We can supply a complete-selection of electricity transmission goods like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. Item INTRODUCTION:
Primary Functions:
one) Made of large high quality EPT alloy, ligEPTT weigEPTT and non-rusting
two) Massive output torque and large radiating efficiency three) EPT operating and reduced noise, can work EPTT time in dreadful condition
4) Great-seeking physical appearance, durable support life and small volume
five) Suited for omnibearing installation
Primary Components:
one)housing: aluminium alloy ADC12(dimension 571-090) die solid iron EPTT200(dimensions one hundred ten-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize ampquencher heat treatment make EPT surface area hardness up to 56-62 EPTC Right after precision grinding, carburization layer’s thickness amongst .three-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one
Merchandise PARAMETERS:
| Measurement | Specification | EPTT ratio | |||||||||||||
| IEC | N | M | P | seven.five | 10 | 15 | 20 | twenty five | 30 | forty | fifty | 60 | 80 | a hundred | |
| D | |||||||||||||||
| twenty five | 56B14 | 50 | 65 | 80 | 9 | 9 | 9 | nine | nine | nine | 9 | nine | nine | ||
| thirty | 63B5 | ninety five | one hundred fifteen | one hundred forty | eleven | eleven | 11 | 11 | 11 | 11 | eleven | eleven | |||
| 63B14 | sixty | 75 | ninety | ||||||||||||
| 56B5 | 80 | one hundred | one hundred twenty | 9 | 9 | nine | 9 | 9 | 9 | nine | nine | 9 | 9 | ||
| 56B14 | 50 | sixty five | eighty | 9 | 9 | 9 | 9 | 9 | nine | 9 | 9 | nine | 9 | ||
| forty | 71B5 | 110 | one hundred thirty | a hundred and sixty | 14 | fourteen | 14 | fourteen | 14 | fourteen | 14 | fourteen | |||
| 71B14 | 70 | eighty five | one zero five | ||||||||||||
| 63B5 | ninety five | a hundred and fifteen | 140 | 11 | eleven | eleven | 11 | eleven | 11 | 11 | 11 | eleven | eleven | eleven | |
| 63B14 | sixty | 75 | 90 | ||||||||||||
| 56B5 | eighty | one hundred | 120 | nine | nine | 9 | 9 | ||||||||
| 50 | 80B5 | one hundred thirty | 165 | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
| 80B14 | 80 | 100 | one hundred twenty | ||||||||||||
| 71B5 | a hundred and ten | 130 | a hundred and sixty | 14 | fourteen | fourteen | fourteen | fourteen | fourteen | fourteen | 14 | 14 | fourteen | – | |
| 71B14 | 70 | 85 | one zero five | ||||||||||||
| 63B5 | ninety five | one hundred fifteen | a hundred and forty | – | – | – | – | – | – | – | eleven | 11 | eleven | 11 | |
| 63 | 90B5 | 130 | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
| 90B14 | ninety five | a hundred and fifteen | 140 | ||||||||||||
| 80B5 | 130 | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
| 80B14 | eighty | a hundred | 120 | ||||||||||||
| 71B5 | 110 | 130 | 160 | – | – | – | – | – | – | fourteen | 14 | fourteen | fourteen | 14 | |
| 71B14 | 70 | 85 | one hundred and five | ||||||||||||
| 75 | one hundred/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
| one hundred/112B14 | one hundred ten | one hundred thirty | one hundred sixty | ||||||||||||
| 90B5 | one hundred thirty | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
| 90B14 | 95 | 115 | a hundred and forty | ||||||||||||
| 80B5 | a hundred thirty | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
| 80B14 | eighty | one hundred | a hundred and twenty | ||||||||||||
| 71B5 | one hundred ten | 130 | 160 | fourteen | fourteen | fourteen | 14 | ||||||||
| 90 | 100/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
| a hundred/112B14 | one hundred ten | a hundred thirty | 160 | ||||||||||||
| 90B5 | a hundred thirty | a hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
| 90B14 | ninety five | 115 | a hundred and forty | ||||||||||||
| 80B5 | 130 | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | |||||||
| 80B14 | eighty | 100 | a hundred and twenty | ||||||||||||
| one hundred ten | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | – | – | – | ||||
| a hundred/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||
| 100/112B14 | one hundred ten | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | 130 | a hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | |||||
| 80B5 | a hundred thirty | a hundred sixty five | 200 | 19 | 19 | ||||||||||
| 130 | 132B5 | 230 | 265 | three hundred | 38 | 38 | 38 | 38 | 38 | 38 | 38 | – | – | – | |
| a hundred/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||||
| a hundred/112B14 | a hundred and ten | 130 | a hundred and sixty | ||||||||||||
| 90B5 | one hundred thirty | one hundred sixty five | 200 | 24 | 24 | ||||||||||
| 150 | 160B5 | 250 | three hundred | 350 | 42 | 42 | forty two | 42 | forty two | – | – | – | – | – | – |
| 132B5 | 230 | 265 | three hundred | 38 | 38 | 38 | 38 | 38 | 38 | ||||||
| one hundred/112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | ||||||||
Item Define Dimensions:
Business Quick INTRODUCTION:
We are a specialist EPTT manufacturer located in EPTTizhou, EPTT province.
Our foremost goods is complete selection of RV571-one hundred fifty worm EPTTs , also supplied hypoid helical EPTT, Pc models, UDL Variators and AC EPTs.
EPT are extensively employed for purposes such as: foodstuffs, EPT, EPTT, chemicals, pharmacy, plastics, paper-producing, development EPTTry, metallurgic EPT, environmental security engineering, and all sorts of automated lines, and assembly lines.
With rapidly shipping and delivery, excellent following-income services, EPTd creating faXiHu (West EPT) Dis.Hu (West EPT) Dis.ty, our items sell well the two at property and abroad. We have exported our EPTTs to SouthEPT Asia, EPTern Europe and the Middle EPT and so on.Our intention is to deveXiHu (West EPT) Dis.Hu (West EPT) Dis. and innovate on the basis of higher high quality, and EPT a excellent status for EPTTs.
WORKSHOP:
EXHIBITIONS:
FAQ:
1.Q:Can you make as per consumer drawing?
A: Sure, we supply EPT support for clients accordingly. We can use customer’s nameplate for EPTTes.
two.Q:What is your phrases of payment ?
A: 30% deposit prior to manufacturing,stability T/T just before shipping.
three.Q:Are you a buying and selling business or manufacturer?
A:We are a manufacurer with EPTd products and seasoned personnel.
four.Q:What is actually your manufacturing potential?
A:8000-9000 PCS/Thirty day period
4.Q:What is your MOQ?
A: one pcs
5.Q:Free of charge sample is obtainable or not?
A:Sure, we can supply free sample if buyer agree to spend for the courier EPT
6.Q:Do you have any certificate?
A:Yes, we have CE certification and SGS certificate report.
Contact info:
Ms Lingel Pan
For any inquiries just truly feel free ton contact me. A lot of thanks for your variety focus to our organization!
in Kansas City United States sales price shop near me near me shop factory supplier Customized Gear Worm Gear Bevel Mechanical Gear Transmission Gear Box Parts manufacturer best Cost Custom Cheap wholesaler
Our merchandise are applied in numerous fields. we offer you one particular-stop remedy for the buy of mechanical electricity transmission merchandise in China. If you need to have any info or samples, remember to contact us and you will have our before long reply.
| EPTTzhou helix spur ring pinion sun EPT wheel |
| with carton box exterior, plastic bags inside of with carton board separate each other |
| forty five-sixty times right after payment |
As a membership of HangEPT high accurate EPTs EPTTrprises, HangEPT EPTTzhou EPTTry EPT EPTT,ltd. Is EPTTized in planning, producing and promoting all kinds of tough amp delicate toothed EPTs, established in 2004 and situated in EPTzhuang EPTT park. With more than a hundred and fifty workers and covering an area more than 16000 sq. meters, the annual generation of firm can attain over two million items EPTs, most utilized in automobile oil pump, motorcar, EPTT, and EPT box. The firm was awarded as EPTTngsu Province EPT EPTT EPTTrprise, and EPTTrprise honoring contracts and stXiHu (West EPT) Dis.Hu (West EPT) Dis. by track record. A quality taxpaying EPTTrprise and an EPTTrprise of AAA credit quality.
We have numerous check EPTTs and outfitted more than 200 sets lathes, incXiHu (West EPT) Dis.Hu (West EPT) Dis. all varieties of hobbing EPTTs, grinding EPTTs, shaping EPTTs, shaving EPTTs and many others. The EPTs with manufacturer quotEPTTzhou quot handed Iso9001:2000 high quality technique in 2008. We have numerous famous consumers in domestic and overEPTT, incXiHu (West EPT) Dis.Hu (West EPT) Dis. Brevini from EPTT, EPT Fuao organization, HangEPT EPTTling Intenal-Combustion Motor Fittings EPTT,ltd., EPTEPTTn EPTTngEPTTGroup, EPTT Buyang Team and so on.
EPTTzhou inherits the organization philosophy of quotgood faith, enthusiasm, desire and action quot, entirely uEPTTzes sources superiority, continually pioneers and invents, absorbs hi-tech talents, introduces EPTd generation amp inspection tools and management approaches and constantly increases top quality of EPTTzhou reXiHu (West EPT) Dis.Hu (West EPT) Dis.ding EPT, manufacturing, quality and sales and many others., in addition, EPT alwaEPTTremains main competitive energy in the marketplace.
